skip to Main Content


Sunchine Inspection, a professional one-stop international inspection provider, focus on providing more flexible and humanized inspection service to clients from all over the world.

Sunchine Inspection, Thinking for you and doing for you!

Get In Touch

Phone: 0086-25-6809 3658
Address: Nanjing - R.P.China

Our Location

Do You Focus on Product Redesign Rather than Process Improvement?


Let’s say you develop a custom product (based on your own design) with a manufacturing partner in China. After 2 years, they push for a price increase because their costs are going up.

And let’s say you cannot raise your purchasing price. You have to find ways to keep costs down in manufacturing.

There is definitely a place for product redesign. It can lead to enormous savings. And often, a Chinese supplier can give suggestions, such as:

  • A cheaper grade of steel would do the work just fine.
  • This piece of fabric could be cut this way, and thus save some fabric.
  • Let’s “clip” these 2 parts instead of screwing them.
  • Another customer uses this different packaging material, have a look.

However, product redesign is very often (always?) suggested, and process improvement very seldom (never?) is.

This seems to be a constant in the electronics industry, especially consumer electronics. All the engineers tend to be working on making a good product and pushing it to market very fast. And they spend very little time improving their production processes and their preventive & predictive maintenance systems.

When they think of their processes, the question is ‘how to automate these process steps?’. And it is not always the answer. Automation often hurts the flexibility to make many different SKUs in relatively small quantities.

In contrast, in car assembly plants, the managers have to drive variable costs down by 5-10% every year. Let’s say a new model is launched this year — the priority is to get the right number of cars, at the right quality level, out the door. And in the next 5 years? Drive costs down by 5-10% every year.

And they have no control over design. There is no way they will be allowed to change the current model.

What do they do to achieve that objective? There are many options, among which:

  • Make some tooling to assist operators
  • Automate some process steps further
  • Improve process controls so that fewer quality issues (necessitating rework, scrap…) come up and fewer inspectors are necessary
  • Improve preventive maintenance to minimize downtime in production and quality issues
  • Train the operators and push for improvement projects, so that they way people work is continuously improving
  • Tweak internal logistics to reduce the number of operators
  • Reduce setup times to process more parts per day (or to keep less inventory on hand)

You get my point. Depending on the main sources of waste identified, a relevant and well-implemented action plan will drive cost down.

Why is it that design changes seem to always be the priority?

As I wrote before, why do most Chinese dislike processes? Or is this just an impression?

Filed Under: Process Improvement

Article Source:

Sunchine Inspection

Sunchine inspection focus on providing more flexible and humanized inspection service to clients from all over the world.

This Post Has 0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Translate »