Quality Assurance in the Production of Automotive Wire Harnesses

Listen to this article

Automotive wire harnesses are a central component of modern vehicles. Against the backdrop of developments such as the connected car and autonomous driving, the highest possible quality is essential. Since quality assurance is a complex and largely manual manufacturing process, the use of a specialized manufacturing execution system (MES) is important.

Digitization has long been an integral aspect of modern vehicle technology. With each successive model generation, the implementation of IT continues to rise. Vehicles are chock full of IT, from engine control systems to driver assistance systems to media centers. These developments are by no means nearing their peak.

A core element of vehicle IT is the wire harness. It acts as a backbone connecting the digital components to each other or to other components, such as the engine or chassis, and also supplies the various devices with electrical power.

This wire harness is now one of the most critical systems with regards to vehicle efficiency and safety. Malfunctions or failures of something such as a stereo system can be annoying. Even the failure of driver assistance systems can still be offset by an attentive driver, but as autonomous vehicles become mainstream, failures will no longer be tolerable, either in the individual components or in the wire harness that connects them together.

Also in this regard, quality requirements will increase dramatically. A wire break or a loose connection in a wire harness system may not only be an inconvenience; it can mean the difference between life or death. Therefore, not only the important systems, but also all systems connected via the wire harness, must be designed with redundancy.

Not so long ago, the wire harness for a particular vehicle model was identical for all vehicles produced of that model. Every wire harness included all of the wires for every possible option, regardless of whether the option was ordered with the vehicle. Some automotive manufacturers still build wire harnesses that way. Other automotive manufacturers design and build their wire harnesses to include only those wires that are needed for the particular options that were ordered with the vehicle. The reason for this high degree of effort is, on the one hand, the restricted space in the vehicle, which is why including unnecessary wires must be avoided as much as possible; and on the other hand, the weight of the wires themselves.

Automotive wire harnesses are now not only very long, they also have a considerable weight, with 50 to 60 kg (110 to 132 lb) not uncommon. Because manufacturers have to take advantage of all opportunities to save weight to reduce fuel consumption and harmful emissions, wire harnesses are also subject to this criterion. The consequence: More and more, wire harness systems are being customized for each particular vehicle instead of for each model.

Production of automotive wire harnesses

The major international manufacturers of automotive wire harnesses, such as Delphi, Leoni, and Yazaki, for example, must not only provide the highest quality, but also be extremely flexible. Automotive wire harnesses must at times be produced in very small batch sizes—sometimes in a batch size of one—without incurring any loss of quality.

The production of automotive wire harnesses is very labor-intensive. The manual labor portion accounts for up to 95 percent of the cost, which is why manufacturers are always looking for manufacturing sites in countries with low labor costs. To achieve this, large numbers of new employees must be recruited and trained, which in turn also has an impact on efficiency and quality. Therefore, fault prevention is a key factor in manufacturing, as is total traceability in order to isolate faults in the event of recalls.

Phase 1: From design to production

The process starts with design and development of the wire harness. The vehicle manufacturer provides a 150-percent drawing of the design of the on-board wiring system to the wire harness manufacturer. This includes all possible variants of the wire harness, based on all possible options for a particular vehicle model.

The engineers at the wire harness manufacturer use this drawing to create a production drawing, a work plan, and corresponding parts lists. However, the manufacturer regularly issues schedule changes at very short intervals, sometimes even daily, and the planning must be adjusted to each of these updates.

This activity is carried out mainly manually by relatively large teams. As always, where manual activities are concerned, and particularly if these must be carried out under time pressure, the error rate is high. Furthermore, manual implementation is contingent on individual working methods and depending on which engineer was working, a production plan may potentially look different. Also, the frequent changes to the drawings are not always managed and documented properly in real time.

Because all these aspects tend to be to the detriment of quality, it makes sense to use a software-controlled planning system. This approach is very innovative. In such a system, the manufacturer can use a scripting language to specify rules that define how a production plan should be structured, detailing, for example, which steps are to be carried out mechanically, which depend on the respective machinery, and what production steps are to be carried out manually or semi-automatically. These rules must be flexible so they can be adjusted. For instance, they could look like this:

If single wire
and 0.35 < cross-section < 6 mm2
then use standard machine

Using such rules as a basis, the system reads the drawing of the automotive manufacturer, analyzes it, and then generates production data, including the work plans and parts lists. In addition to a considerable savings in work time, the quality advantages are high due to the elimination of manual fault sources and the standardization of an implementation procedure.

Such software can also calculate the production documents on the basis of a specific, just-in-time delivery schedule. The appropriate wire harness is then produced and delivered just in time for a specific vehicle in a batch size of one.

Phase 2: Production of automotive wire harnesses

Below the ERP level, the task of the MES is the control and documentation of the production of an automotive wire harness. However, as wiring harness production has many specific aspects, “general” MES systems could not be used. They fail, for example, in the technical IT description of a wiring harness.

Therefore, different wiring harness manufacturers have developed their own MES systems. However, these “custom-made software solutions” no longer fit when production processes or ERP systems change. Another issue is that know-how is often undocumented and not linked to specific employees. Therefore, leading automotive wire harness manufacturers rely on systems that have been developed specifically for the wire harness industry.

Wire harnesses are produced in three phases: cutting, pre-assembly, and final assembly.

Cutting
Wire processing in the cutting area is highly automated. Cut, strip, and terminate (CST) machines cut the wires to specific lengths (C), strip off the insulation (S), and apply seals and terminals (T). More complex machines can also perform additional process steps such as twisting wires. Wires produced in this way are grouped into bundles and made available to the next production step.

A special MES ensures the optimum distribution of the orders across the various machines in order to increase productivity. But quality and traceability are also important here. In a CST machine, the production rates are usually very high, and the wires are sometimes very small in diameter. Of course it is primarily the CST machine itself that ensures precision and quality, but the MES also makes an important contribution by transferring control data, such as crimp data, directly to the connected machines. The MES can also ensure quality assurance process steps, such as scanning the barcodes for the wire and terminals, enforcing crimp height and pull tests, and by monitoring tool maintenance cycles.

To set up traceability, an MES assigns a unique ID to each wire bundle produced and manages it continuously throughout its history.

Pre-assembly
The next production phase of a wire harness is highly manual. In the first pre-assembly phase, the wire bundles produced in the cutting area are assembled into simple kits using procedures such as crimping, ultrasonic welding, and twisting. The history is of course updated. When producing a kit, a new ID is generated, and all components included in the kit are saved so that the history is complete.

Since manufacturers often relocate their production to low-cost labor countries for cost reasons, entire factories are built seemingly overnight, and thousands of new employees must be recruited. However, a lack of relevant experience and technical qualifications signify high risks for product quality. The MES software places great emphasis on instructions to employees directly at the workplace.

Final assembly
In the final assembly area, the wire harnesses are assembled on wire harness boards. Generally, the wire harness boards are mounted on a moving assembly line, where assembly personnel each mount one or more wires to the harness board. At each workstation, each employee must perform the correct work steps. Given that wiring harnesses are generally produced to be customer-specific, the work steps can differ from wire harness to wire harness. Therefore, there is a good chance that errors will be made—an additional challenge for quality assurance. An MES controls this complex process with display monitors, which provide employees with detailed information for the relevant work steps to be performed. Employees can also be prompted by the system to confirm certain steps, perform test steps, or input QA-relevant data. The software can thereby provide a high level of quality in these highly manual processes.

The history is of course updated in the final assembly. The finished wire harness now consists of hundreds or thousands of components, and the system retains a complete history for each component. The system keeps track of which machine, which employee, and which tools were used to produce the individual circuits and components for each wire harness.

This means that it can be subsequently determined which vehicles have wire harnesses built with wire from a specific batch. This also enables any repairs or recalls to be isolated, and any product liability issues can be quickly clarified.

Quality control managed by software is essential for producing automotive wire harnesses in increasingly digitized vehicle technology. Otherwise, the necessary quality for the demanding task cannot be guaranteed. Traceability is key for ensuring product quality and managing product recalls. Conventional MES systems are not up to the task of managing the highly specialized nature of automotive wire harness production.

PUBLISHED: MONDAY, MARCH 26, 2018 – 12:01

Article Source: https://www.qualitydigest.com/inside/quality-insider-article/quality-assurance-production-automotive-wire-harnesses-032618.html